Differences

This shows you the differences between two versions of the page.

--- kicad_schematic_entry [2018/11/07 22:34] – [Add more connectors] tell
+++ kicad_schematic_entry [2018/11/22 11:07] (current) – tell
@@ Line 45: / Line 45: @@
 ===== Update some component values =====
+{{ :annotated-values.png?100|}}
 Resistors: edit component, then change R_US to
@@ Line 56: / Line 57: @@
 Change the value of the LED for power to "5mm_YELLOW".
-{{ :annotated-values.png?100| }}
+----
+Continue by assigning fooprints on the [[kicad cvpcb]] page.
+After doing footprint assignment, don't forget to save!
+===== Create Netlist =====
+The last step do be done in the schematic editor is creating the //netlist//.
+Push the green Create Netlist ("Net") button, and accept the default name.
+that's it! you should be able open up the pcb editor, hit "read netlist", and see all of your parts.