Eastbots Wiki

User Tools

Site Tools

Trace:
dio_tester_and_breakout

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
dio_tester_and_breakout [2019/03/12 22:04] – [Proposed Revision 3: Feb 2019] telldio_tester_and_breakout [2019/10/07 23:16] (current) – [Revision 2: Jan 2019] tell
Line 68: Line 68:
   * add two tiny mounting holes.  To avoid enlarging the board, these holes only accept #2 bolts.  nylon hardware is recommended, as they're quite close to components   * add two tiny mounting holes.  To avoid enlarging the board, these holes only accept #2 bolts.  nylon hardware is recommended, as they're quite close to components
   * add silkscreen labeling the three signals on the connectors "ground", "signal", and "+" power.   * add silkscreen labeling the three signals on the connectors "ground", "signal", and "+" power.
 +
 +This version of the board design is https://oshpark.com/projects/SlhiHbwO
  
 ====== Proposed Revision 3: Feb 2019 ====== ====== Proposed Revision 3: Feb 2019 ======
dio_tester_and_breakout.1552442656.txt.gz · Last modified: 2019/03/12 22:04 by tell